CertainTeed Crawl Space Encapsulation: The Glendale Owner’s Guide
We stock and install CertainTeed-compatible crawl space encapsulation systems in Glendale, with most complete jobs running $3,800-$6,200 depending on square footage and whether the foundation needs pretreatment. Same-day installation is available when we have your liner spec on the truck, which we do for the 6-mil through 20-mil CertainTeed MemBrain and DiamondBack series. Most Glendale homeowners realize their encapsulation has failed when they notice a sharp musty smell returning after months of dryness, or when they spot pooling near the sump pit during our brief but intense winter rains.
Which CertainTeed Models This Applies To
CertainTeed’s crawl space line breaks into two families: the MemBrain smart vapor retarders (variable permeance, 6-mil to 10-mil) and the DiamondBack woven-reinforced liners (12-mil to 20-mil). The MemBrain series is labeled on the white edge strip with a lot number and mil rating; DiamondBack has a diamond-pattern texture and the series name embossed every 24 inches. If your existing liner is torn or delaminated, check the edge strip before calling - the mil rating determines whether we can patch or must replace.
We carry both OEM CertainTeed rolls and Reinforced Polyethylene (RPE) equivalents that meet the same permeance specs at lower cost. The gotcha: CertainTeed’s MemBrain uses a proprietary variable-permeance polyamide layer - a moisture-responsive film that opens and closes to vapor drive - and generic RPE cannot replicate that function. For DiamondBack, aftermarket works fine. We stock 10-mil MemBrain and 16-mil DiamondBack on every Glendale truck because those are what we see in 80% of local installs from 2018-2023.
Topside Attic Insulation Glendale is an independent service provider with no affiliation to CertainTeed Corporation.
Signs Your CertainTeed Crawl Space Encapsulation Is Failing

- Musty odor returning in summer. Glendale’s dry climate lulls people, but when the Santa Ana winds stop and humidity creeps above 60%, a compromised MemBrain liner stops “breathing” properly. The polyamide layer degrades with UV exposure during installation, and once it’s damaged, the variable permeance fails in one direction only - trapping moisture inside.
- Pooling at seams or posts. DiamondBack’s woven scrim can separate from the polyethylene face when installers used staples instead of pressure-sensitive tape. We see this constantly in Verdugo Woodlands ranches where the original contractor rushed the detail work around pier pads.
- White chalky film on the liner surface. This is plasticizer migration, common in 6-mil MemBrain installed before 2020 when CertainTeed reformulated the base resin. It doesn’t mean immediate failure, but the liner is embrittling and will crack within 18-24 months.
- Sump pump running more frequently. The encapsulation isn’t just the liner - it’s the sealed envelope. Gaps at the rim joist or failed tape seams let humid outside air contact cool surfaces, and the dehumidifier or sump works overtime to compensate.
- Insect or rodent activity under the liner. Tears as small as a quarter let pests nest between the liner and soil, and their body heat accelerates condensation. In Glendale’s older neighborhoods near the 134 freeway, we’ve pulled back liners to find entire ant colonies farming aphid honeydew on the damp polyethylene.
Before
AfterReplacement Cost & What’s Included
In Glendale, a full CertainTeed encapsulation replacement runs $3,800-$6,200 for crawl spaces between 800 and 1,800 square feet. The driver isn’t the liner cost - it’s pretreatment. If the old liner was installed over bare soil without a drainage mat, we remove everything, grade for positive flow, and install a dimpled drainage mat (a high-density polyethylene grid that channels water to the sump) before laying new material. That adds $800-$1,400 but prevents the same failure mode.
| Component | Price Range |
|---|---|
| MemBrain 10-mil liner (OEM) | $1.85-$2.40/sq ft installed |
| DiamondBack 16-mil liner (OEM) | $2.20-$2.85/sq ft installed |
| Drainage mat (if needed) | $0.90-$1.20/sq ft |
| Rim joist sealing with closed-cell foam | $450-$780 |
| Sump pit relocation or upgrade | $380-$650 |
Every job gets a written price before any work starts - Haven Standard Clause 1 - and closes with a Documented Photo Record showing seam tape application, overlap measurements, and the final sealed condition. We also publish before-and-after blower-door numbers when the crawl space connects to conditioned space through floor penetrations, so you can verify the air-sealing result in CFM50.
DIY or Call Us?

There’s safe checking, and then there’s work that belongs to someone with a respirator and a headlamp.
An owner can verify the liner mil rating from the edge strip, photograph seam failures for our text line, and confirm whether their sump is cycling - all useful, all safe. What we don’t recommend: crawling under to cut out old liner (disturbed rodent droppings carry hantavirus), handling fiberglass insulation overhead without PPE, or attempting to seal rim joists with canned foam - the expansion pressure can bow sill plates, and missed gaps defeat the entire system.
Our crews carry HEPA vacuums, powered air-purifying respirators, and the 6-mil through 20-mil CertainTeed rolls on every truck. If you’re in Glendale and the musty smell is back, text us a photo of the edge strip and we’ll tell you whether it’s a patch job or a full replacement before we schedule. Call (213) 474-3828 or text - a live person answers either way, 24/7.
FAQs
MemBrain liners last 15-20 years in Glendale’s dry climate if installed with proper drainage; DiamondBack can go 20-25. The killer is UV exposure during installation - even 20 minutes of direct sun on the rolled material degrades the polyamide layer. We stage installs to unroll in shade, which is why we see fewer callbacks than competitors who work midday in exposed crawl space entries. For a lifespan assessment on your specific install, call (213) 474-3828 - estimates are free.
Yes, if the tear is under 12 inches, the surrounding material is still supple, and the tear isn’t at a seam. We patch with 4-inch vapor-barrier tape and a pressure roller, not duct tape - duct tape’s adhesive fails in months under soil contact. If the liner is chalky, brittle, or delaminating, patchwork is expensive noise reduction. Call (213) 474-3828 and we’ll tell you which category you’re in.
Most Glendale crawl spaces finish in one long day or two standard days. Day one: remove old material, pretreat and grade, install drainage mat if needed. Day two: lay liner, seal seams with double-sided vapor tape, seal rim joists, test sump and dehumidifier. We don’t rush seam work - a 1,200-square-foot crawl with 30 piers has roughly 400 linear feet of cuts and overlaps, and every one gets rolled. You’ll get a completion photo record before we leave.
We carry 10-mil MemBrain, 16-mil DiamondBack, drainage mat, closed-cell foam for rim joists, and the full tape and fastener suite on every vehicle. For the 20-mil DiamondBack or specialty sizes over 16 feet wide, we pull from our Burbank warehouse with same-day availability. If you have a CertainTeed part number from your original install paperwork, text it to (213) 474-3828 and we’ll confirm stock before we schedule.
Written by Wes Okafor, Owner, Topside Attic Insulation Glendale at Topside Attic Insulation Glendale, serving Glendale and nearby areas.